- BEARING MFG.CORP.
- Crossed Roller Bearing Spherical Roller Bearing Taper Roller Bearing
English
Home>Products>Withdrawal sleeves>CPR81213 Thrust Plate 65x100x8mm
CPR81213 Thrust Plate 65x100x8mm
category
Withdrawal sleeves
CPR81213 Thrust Plate 65x100x8mm SPECIFICATIONS
CPR81213 Thrust Plate 65x100x8mm SEARCH - 6000 rpm Grease Speed Rating n1 Whether it's agriculture or construction equipment 6000 rpm Sealed Speed Rating n3 your working on, BEARING MFG.CORP. Has theWithdrawal sleeves you need.
- 6000 rpm
- 36500 N
- 6000 rpm
- 8000 rpm
- Two Seals & Snap-Rin
- 39100 N
- 35.000 mm
- 1.00 mm
-
BEARING MFG.CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
CPR81213 Thrust Plate 65x100x8mm Systems
- 6000 rpm
- 36500 N
- 6000 rpm
- 8000 rpm
- Two Seals & Snap-Rin
- 39100 N
- 35.000 mm
- 1.00 mm
- 72.0000 mm
- 30.20 mm
CPR81213 Thrust Plate 65x100x8mm Compare similar products
| No. | Brand | J | F | f | T | A | s | S | r |
| 7017CD/P4A | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 36-Clips | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | INA | - | - | - | - | - | - | - | - |
| 21.15 | - | - | - | - | - | - | - | - | - |
| 150lm/W | INA | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 1220*2440*18mm | - | - | - | - | - | - | - | - | - |
| 1000w | - | - | - | - | - | - | - | - | - |
| H20 | - | - | - | - | - | - | - | - | - |
| 22315K | koyo | - | - | - | - | - | - | - | - |
| W208PP | FAFNIR | - | - | - | - | - | - | - | - |
| SM1212 | - | - | - | - | - | - | - | - | - |
| 85mm | - | - | - | - | - | 4.2 mm | - | - | - |
| 90lm/W | - | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| 6304-2Z/C3-2RS2/C3GFG | INA | - | - | - | - | - | - | - | - |
| NU2315-E-XL-M1A-C3 | fag | - | - | - | - | - | - | - | - |
| LM5050-WN30-12V | - | - | - | - | - | - | - | - | - |
| 38W | INA | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 32006J | koyo | - | - | - | - | - | - | - | - |
| SL183030-C3 | INA | - | - | - | - | - | - | - | - |
| MCV3_ | - | - | - | - | - | - | - | - | - |
| 151f0103 | Danfoss | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| L-4044 | - | - | - | - | - | - | - | - | - |
| AHX2330G Withdrawal Sleeve(matched Bearing:22330CCK/W33, 22330CAK/W33) | Grease Speed Rating n1:2900 rpm; Oil Speed Rating n2:5000 rpm; Basic Static Radial Load Rating Co:108000 N; Fillet Radius rb:0.040 in; d:6.000 in; Fillet Radius ra:0.10 in; D:8.0000 in; Basic Dynamic Radial Load Rating C:81900 N; B:1.0000 in; |
| 86458 / CR86458 Stainless Speedi Sleeve For Shaft Repair | R1:120.65 mm; L:711.2 mm; J min.:549.275 mm; P120°:107 kN; J max.:619.125 mm; N1:34.925 mm; Initial grease fill:1672.65 g; Mass pillow block:172 kg; A2:339.725 mm; P150°:94.3 kN; |
| 99513 / CR 99513 Stainless Speedi Sleeve For Shaft Repair | d:70.000 mm; Sealed Speed Rating n3:2600 rpm; D:180.0000 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Grease Speed Rating Open/Shielded n1:3800 rpm; Accessories:Two Shields & Snap-R; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:143000 N; Basic Static Radial Load Rating Co:104000 N; B:42.00 mm; |
| HMV100E / HMV 100E Hydraulic Nut 502x636x79mm | Clearance:Standard; Seals or Shields:Open Type; Weight:4.20 KGS; Grease Limiting Speed (r/min):5300; D:250mm; SKU:71936cd/p4adga-skf; Oil Limiting Speed (r/min):8000; Preload:Light; Dynamic Load Rating (kN):168; Cage Type:Plastic; |
| 99438 / CR99438 Stainless Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):93.5; Weight:0.02 KGS; Clearance:Standard; d:44.45mm; Oil Limiting Speed (r/min):5800; Grease Limiting Speed (r/min):4300; Cage Type:Steel; Static Load Rating (kN):125; D:88.9mm; Availability:In Stock; |
| CR99068 Stainless Steel Speedi Sleeve For Shaft Repair | Static Load Rating (kN):7530; SKU:24164kejw33w45a-timk; Weight:203.00 KGS; Limiting Speed Rating (r/min):390; d:320mm; Reference Speed Rating (r/min):410; D:540mm; Availability:In Stock; Cage Type:Steel; Dynamic Load Rating (kN):4790; |
| HMV102E / HMV 102E Hydraulic Nut 512x648x80mm | d:59.987 mm; rb max.:3.3 mm; Da min.:102 mm; Calculation factor e:0.83; ra max.:3.5 mm; d1 ≈:97.1 mm; db min.:73.5 mm; da max.:74 mm; Ca min.:5 mm; Calculation factor Y:0.72; |
| AH2336G Withdrawal Sleeve(matched Bearing:22336CAK/W33,22336CCK/W33) | PG:1/8 NPT; R1:53.181 mm; Bearing:22216 EK; Da:140 mm; R2:21.431 mm; ba:33.337 mm; Initial grease fill:87.885 g; Cap bolt recommended tightening torque:298.3 N·m; P150°:44.5 kN; Mass pillow block:21.8 kg; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
CPR81213 Thrust Plate 65x100x8mm Video
Contact Us
- BEARING MFG.CORP.
- Address1500 Holmes Road, Elgin, lL 60123, U.S.A.
- Phone(Working Time)888-6528
- Fax
Withdrawal sleeves CATEGORIES
- Crossed Roller Bearing
- Spherical Roller Bearing
- Taper Roller Bearing
- Thrust Roller Bearings
- Water pump bearings
- Wind power bearings
- Wire Race Bearing
- Withdrawal sleeves
- YRT bearing
- 6005 2rs Bearing
- 6306 Bearing
- L68149 Bearing
- Ucp210 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Thrust Tapered Roller Bearings
- Thrust Cylindrical Roller Bearing
- Tapered Roller Bearing
- Angular Contact Ball Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings
HMV82E / HMV 82E Hydraulic Nut 412x534x72mm
15 mm x 32 mm x 9 mm HMV80E / HMV 80E Hydraulic Nut 402x522x71mm
HMV76E / HMV 76E Hydraulic Nut 382x498x69mm
HMV74E / HMV 74E Hydraulic Nut 372x486x68mm
HMV73E / HMV 73E Hydraulic Nut 367x482x68mm