- BEARING MFG.CORP.
- Crossed Roller Bearing Spherical Roller Bearing Taper Roller Bearing
English
Home>Products>Withdrawal sleeves>AOH32/900 (232/900CAK/W33, 232/900CAK, 232/900CCK, 232/900CCK/W33 Bearing Withdrawal Sleeve)
AOH32/900 (232/900CAK/W33, 232/900CAK, 232/900CCK, 232/900CCK/W33 Bearing Withdrawal Sleeve) MODELS
Need a CAD or 3D Model?
AOH32/900 (232/900CAK/W33, 232/900CAK, 232/900CCK, 232/900CCK/W33 Bearing Withdrawal Sleeve)
category
Withdrawal sleeves
AOH32/900 (232/900CAK/W33, 232/900CAK, 232/900CCK, 232/900CCK/W33 Bearing Withdrawal Sleeve) SPECIFICATIONS
Manufacturers of all Withdrawal sleeves are represented in our partial 1.0000 in Dimension C list of BEARING MFG.CORP. clients. Contact Gary for a complete AOH32/900 (232/900CAK/W33, 232/900CAK, 232/900CCK, 232/900CCK/W33 Bearing Withdrawal Sleeve) 2.219 in Span B list of clients and projects.
- 2.219 in
- 1.0000 in
- 1990 lbf
- 3.000 in
- 1270 lbf
- CONV-504-3
- D3000
- CONV-504-3
-
BEARING MFG.CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
AOH32/900 (232/900CAK/W33, 232/900CAK, 232/900CCK, 232/900CCK/W33 Bearing Withdrawal Sleeve) Systems
- 2.219 in
- 1.0000 in
- 1990 lbf
- 3.000 in
- 1270 lbf
- CONV-504-3
- D3000
- CONV-504-3
AOH32/900 (232/900CAK/W33, 232/900CAK, 232/900CCK, 232/900CCK/W33 Bearing Withdrawal Sleeve) Compare similar products
| No. | Brand | J | F | f | T | A | s | S | r |
| [2 | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| GG-4 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| S44 | RBC | - | - | - | - | - | - | 4.763 mm | - |
| E0e1e2 | - | - | - | - | - | - | - | - | - |
| 32213JR | INA | - | - | - | - | - | - | - | - |
| 4X8FT | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| 201 | - | - | - | - | - | - | - | - | - |
| PC450-8 | - | - | - | - | - | - | - | 2.5 mm | - |
| 400W | - | - | - | - | - | - | - | - | - |
| A6V28HA1H | - | - | - | - | - | - | - | - | - |
| 23948 | SKF | - | - | - | - | - | - | - | - |
| 3-Tier | - | - | - | - | - | - | - | - | - |
| 3.6mm | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| RG250 | - | - | - | - | - | - | - | - | - |
| 22314CDE4 | NSK | - | - | - | - | - | - | - | - |
| 1307 | NSK | - | - | - | - | - | - | - | - |
| 6W | - | - | - | - | - | - | - | - | - |
| 61803.2RSR | fag | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| RV025-RV150 | - | - | - | - | - | - | - | - | - |
| [25 | - | - | - | - | - | - | - | - | - |
| 1.2 | - | - | - | - | - | - | - | - | - |
| 30LEDs/M | - | - | - | - | - | - | - | - | - |
| SZR660 | - | - | - | - | - | - | - | - | - |
| 6mm/9mm/12mm/15mm/16mm/18mm | - | - | - | - | - | - | - | - | - |
| CR99092 Stainless Steel Speedi Sleeve For Shaft Repair | Comparative axial load rating CFa:1420 kN; Mass bearing:720 kg; r3,4 min.:9999 mm; Calculation factor Y0:0.8; T:304.8 mm; D:9999 mm; Calculation factor Y1:0.77; Calculation factor e:0.88; d:635 mm; B:304.8 mm; |
| AHX310 Withdrawal Sleeve (22210EK Bearing) | Reference Speed Rating (r/min):20000; D:72mm; Dynamic Load Rating (kN):27; Static Load Rating (kN):15.3; Availability:In Stock; Clearance:C3; SKU:6207/c3-skf; Weight:0.02 KGS; B:17mm; Seals or Shields:Open Type; |
| AOHX31/710 (231/710CAK/W33, C31/710K, 231/710CAK, 231/710CCK Bearing Withdrawal Sleeve) | Seals or Shields:Open Type; Weight:0.02 KGS; SKU:22211-e1-fag; Limiting Speed Rating (r/min):8500; B:25mm; Static Load Rating (kN):130; Availability:In Stock; d:55mm; Clearance:Standard; Fatigue Load Rating (kN):17.3; |
| 99595 / CR 99595 Stainless Speedi Sleeve For Shaft Repair | SKU:1310ektn9-qbl; Weight:0.02 KGS; Cage Type:Plastic; Clearance:Standard; Availability:In Stock; B:27mm; Seals or Shields:Open Type; D:110mm; d:50mm; |
| TRE4458 Thrust Bearing Ring / Thrust Needle Bearing Washer 69.85x92.075x4mm | r1,2 min.:7 mm; Cb min.:12.5 mm; Da min.:184 mm; Calculation factor e:0.33; C:53.975 mm; d:114.975 mm; Fatigue load limit Pu:88 kN; T:66.675 mm; Dimension series:HH 224300; Reference speed:2200 r/min; |
| 99494 / CR 99494 Stainless Speedi Sleeve For Shaft Repair | A:35 mm; Thread grub screw G2:5/16-24 UNF; Recommended diameter for attachment bolts, mm G:12 mm; Hexagonal key size for grub screw N:3.969 mm; Db:90 mm; J:92 mm; Housing:FYWK 507 Y; Basic dynamic load rating C:25.5 kN; L:118 mm; End cover:ECW 207; |
| 86407 / CR86407 Stainless Speedi Sleeve For Shaft Repair | Fatigue load limit Pu:9.8 kN; Calculation factor Y0:2.5; Calculation factor Y1:2.4; d1:35 mm; d2 ≈:49.6 mm; ra max.:1 mm; G1:6 mm; Basic static load rating C0:90 kN; B2 ≈:32 mm; Basic dynamic load rating C:98.5 kN; |
| HMV102E / HMV 102E Hydraulic Nut 512x648x80mm | d:59.987 mm; rb max.:3.3 mm; Da min.:102 mm; Calculation factor e:0.83; ra max.:3.5 mm; d1 ≈:97.1 mm; db min.:73.5 mm; da max.:74 mm; Ca min.:5 mm; Calculation factor Y:0.72; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
AOH32/900 (232/900CAK/W33, 232/900CAK, 232/900CCK, 232/900CCK/W33 Bearing Withdrawal Sleeve) Video
Contact Us
- BEARING MFG.CORP.
- Address1500 Holmes Road, Elgin, lL 60123, U.S.A.
- Phone(Working Time)888-6528
- Fax
Withdrawal sleeves CATEGORIES
- Crossed Roller Bearing
- Spherical Roller Bearing
- Taper Roller Bearing
- Thrust Roller Bearings
- Water pump bearings
- Wind power bearings
- Wire Race Bearing
- Withdrawal sleeves
- YRT bearing
- 6005 2rs Bearing
- 6306 Bearing
- L68149 Bearing
- Ucp210 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Thrust Tapered Roller Bearings
- Thrust Cylindrical Roller Bearing
- Tapered Roller Bearing
- Angular Contact Ball Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings
HMV82E / HMV 82E Hydraulic Nut 412x534x72mm
15 mm x 32 mm x 9 mm HMV80E / HMV 80E Hydraulic Nut 402x522x71mm
HMV76E / HMV 76E Hydraulic Nut 382x498x69mm
HMV74E / HMV 74E Hydraulic Nut 372x486x68mm
HMV73E / HMV 73E Hydraulic Nut 367x482x68mm