- BEARING MFG.CORP.
- Crossed Roller Bearing Spherical Roller Bearing Taper Roller Bearing
English
Home>Products>Withdrawal sleeves>AOH3260G(23260CCK/W33, 23260CAK/W33, 23260CCK, 23260CAK Bearing Withdrawal Sleeve)
AOH3260G(23260CCK/W33, 23260CAK/W33, 23260CCK, 23260CAK Bearing Withdrawal Sleeve) MODELS
Need a CAD or 3D Model?
AOH3260G(23260CCK/W33, 23260CAK/W33, 23260CCK, 23260CAK Bearing Withdrawal Sleeve)
category
Withdrawal sleeves
AOH3260G(23260CCK/W33, 23260CAK/W33, 23260CCK, 23260CAK Bearing Withdrawal Sleeve) SPECIFICATIONS
What BEARING MFG.CORP. 793.8 g Initial grease fill is AOH3260G(23260CCK/W33, 23260CAK/W33, 23260CCK, 23260CAK Bearing Withdrawal Sleeve) in mechanical engineering? Withdrawal sleeves Manufacturing Service . Upload 102.794 mm Ca your CAD 558.8 mm L file for an instant.
- 102.794 mm
- 558.8 mm
- 793.8 g
- 85.9 kN
- 2 x LOR 116
- 222.25 mm
- 111.125 mm
- 94.3 kN
-
BEARING MFG.CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
AOH3260G(23260CCK/W33, 23260CAK/W33, 23260CCK, 23260CAK Bearing Withdrawal Sleeve) Systems
- 102.794 mm
- 558.8 mm
- 793.8 g
- 85.9 kN
- 2 x LOR 116
- 222.25 mm
- 111.125 mm
- 94.3 kN
- 158.75 mm
- 1/4 NPT
AOH3260G(23260CCK/W33, 23260CAK/W33, 23260CCK, 23260CAK Bearing Withdrawal Sleeve) Compare similar products
| No. | Brand | J | F | f | T | A | s | S | r |
| 99-05 | koyo | - | - | - | - | - | - | - | - |
| 12" | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 35X80X21X28 | - | - | - | - | - | - | - | - | - |
| L7054380253 | Parker | - | - | - | - | - | - | - | - |
| 24148-E1 | fag | - | - | - | - | - | - | - | - |
| 15x32x8 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 3W | - | - | - | - | - | - | - | - | - |
| 6001-ZZ | - | - | - | - | - | - | - | - | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| 9o-1b20-0223-0547-1 | - | - | - | - | - | - | - | - | - |
| ZAXIS450 | - | - | - | - | - | - | - | - | - |
| Dbdh10p10b/315 | - | - | - | - | - | - | - | - | - |
| 4T-LM48548 | Bower | - | - | - | - | - | - | - | - |
| x320 | - | - | - | - | - | - | - | - | - |
| 30W-150W | - | - | - | - | - | - | - | - | - |
| T6C-022-1R00-B1 | Parker | - | - | - | - | - | - | - | - |
| 610mmx2440mm | - | - | - | - | - | - | - | - | - |
| SZR660 | - | - | - | - | - | - | - | - | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| NJ218ECM | SKF | - | - | - | - | - | - | - | - |
| 3-9x40 | IKO | - | - | - | - | - | - | - | - |
| 250 | NTN | - | - | - | - | - | - | - | - |
| 50X50cm | - | - | - | - | - | - | - | - | - |
| 513052 | Timken | - | - | - | - | - | - | - | - |
| AOHX3288G (23288CAK/W33, 23288CAK, 23288CCK Bearing Withdrawal Sleeve) | Limiting Speed Rating (r/min):32000; Reference Speed Rating (r/min):32500; Fatigue Load Rating (kN):0.053; B:6mm; Clearance:Standard; Seals or Shields:Single Metal Shield; Availability:In Stock; D:19mm; d:6mm; Static Load Rating (kN):1.1; |
| TIH L77/LV Bearing Induction Heater | Calculation factor X:0.67; Basic dynamic load rating C:41.5 kN; da min.:47 mm; B:18 mm; Calculation factor Y0:0.38; Da max.:73 mm; Calculation factor Y2:1.41; Fatigue load limit Pu:1.25 kN; r3,4 min.:0.6 mm; a:23 mm; |
| TMMA 80 Bearing Puller | S:2.5 mm; J6:355 mm; Fatigue load limit Pu:39 kN; Limiting speed:2800 r/min; P0°:470 kN; Tightening torque for attachment bolts:665 N·m; Grub screws:7 x M 6; P180°:310 kN; Pa:35 kN; Mass bearing unit:21 kg; |
| CP2035 Thrust Plate 20x34.5x0.8mm | Da max.:78 mm; Calculation factor Y2:4.6; B2:13 mm; d3:65 mm; Basic static load rating C0:7.8 kN; D:85 mm; B1:39 mm; Calculation factor e:0.21; da max.:53 mm; Calculation factor Y0:3.2; |
| FTRD5578 Thrust Bearing Ring / Thrust Needle Bearing Washer 55x78x2.5mm | Oil Speed Rating n2:4500 rpm; Basic Static Radial Load Rating Co:143000 N; D:130.0000 mm; Grease Speed Rating n1:3400 rpm; Accessories:One Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:134000 N; Sealed Speed Rating n3:3400 rpm; Fillet Radius ra:2.00 mm; B:57.20 mm; d:60.000 mm; |
| ZM105 Precision Locknut (M105x2)x140x22mm | Bearing number:7405 A; Size (mm):25x80x21; Bore Diameter (mm):25; Outer Diameter (mm):80; Width (mm):21; d:25 mm; D:80 mm; B:21 mm; C:21 mm; Angle (α):25 °; a:26,4 mm; |
| CMAK 450-SL Energy Monitoring Kit | Basic static load rating C0:285 kN; a:33.228 mm; r1,2 min.:2.5 mm; Calculation factor Y:1.4; r3,4 min.:2 mm; Mass bearing:2.61 kg; d:85 mm; B:36 mm; T:38.5 mm; C:30 mm; |
| 81390 / CR81390 Stainless Speedi Sleeve For Shaft Repair | Weight:0.01 KGS; Limiting Speed Rating (r/min):34000; D:19mm; d:10mm; Clearance:Standard; Cage Type:Steel; Seals or Shields:Two Rubber Seals; SKU:618002rs-timken; B:5mm; Static Load Rating (kN):0.84; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
AOH3260G(23260CCK/W33, 23260CAK/W33, 23260CCK, 23260CAK Bearing Withdrawal Sleeve) Video
Contact Us
- BEARING MFG.CORP.
- Address1500 Holmes Road, Elgin, lL 60123, U.S.A.
- Phone(Working Time)888-6528
- Fax
Withdrawal sleeves CATEGORIES
- Crossed Roller Bearing
- Spherical Roller Bearing
- Taper Roller Bearing
- Thrust Roller Bearings
- Water pump bearings
- Wind power bearings
- Wire Race Bearing
- Withdrawal sleeves
- YRT bearing
- 6005 2rs Bearing
- 6306 Bearing
- L68149 Bearing
- Ucp210 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Thrust Tapered Roller Bearings
- Thrust Cylindrical Roller Bearing
- Tapered Roller Bearing
- Angular Contact Ball Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings
HMV82E / HMV 82E Hydraulic Nut 412x534x72mm
15 mm x 32 mm x 9 mm HMV80E / HMV 80E Hydraulic Nut 402x522x71mm
HMV76E / HMV 76E Hydraulic Nut 382x498x69mm
HMV74E / HMV 74E Hydraulic Nut 372x486x68mm
HMV73E / HMV 73E Hydraulic Nut 367x482x68mm