- BEARING MFG.CORP.
- Crossed Roller Bearing Spherical Roller Bearing Taper Roller Bearing
English
Home>Products>Withdrawal sleeves>MSR55x2 Precision Locknut / MSR-M55x2 Locking Nut (M55x2)x75x25mm
MSR55x2 Precision Locknut / MSR-M55x2 Locking Nut (M55x2)x75x25mm MODELS
Need a CAD or 3D Model?
MSR55x2 Precision Locknut / MSR-M55x2 Locking Nut (M55x2)x75x25mm
category
Withdrawal sleeves
MSR55x2 Precision Locknut / MSR-M55x2 Locking Nut (M55x2)x75x25mm SPECIFICATIONS
Various Withdrawal sleeves types and sizes BEARING MFG.CORP. to C3 Clearance: accommodate 16000 Limiting Speed Rating (r/min): your MSR55x2 Precision Locknut / MSR-M55x2 Locking Nut (M55x2)x75x25mm requirements.
- C3
- 16000
- Steel
- 17mm
- 6305/c3-skf
- New
- 24000
- Open Type
-
BEARING MFG.CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
MSR55x2 Precision Locknut / MSR-M55x2 Locking Nut (M55x2)x75x25mm Systems
- C3
- 16000
- Steel
- 17mm
- 6305/c3-skf
- New
- 24000
- Open Type
- 0.49
- In Stock
MSR55x2 Precision Locknut / MSR-M55x2 Locking Nut (M55x2)x75x25mm Compare similar products
| No. | Brand | J | F | f | T | A | s | S | r |
| PC120-5 | Komatsu | - | - | - | - | - | - | - | - |
| EX85 | - | - | - | - | - | - | - | - | - |
| SK50 | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 7956 | - | - | - | - | - | - | - | - | - |
| 23080CCK/W33 | - | - | - | - | - | - | - | - | - |
| 3000277001 | - | - | - | - | - | - | - | - | - |
| 5pcs | - | - | - | - | - | - | - | - | - |
| LM301H | - | - | - | - | - | - | - | - | - |
| s.201140 | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 60W | - | - | - | - | - | - | - | - | - |
| (10-5-10) | - | - | - | - | - | - | - | - | - |
| 180 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| 12229-16G00-0B0 | - | - | - | - | - | - | - | - | - |
| 6204 | NTN | - | - | - | - | - | - | - | - |
| 315 | - | - | - | - | - | - | - | - | - |
| CH4N2O | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| PC400-7 | - | - | - | - | - | - | - | - | - |
| SC150 | - | - | - | - | - | - | - | - | - |
| 30LEDs/M | - | - | - | - | - | - | - | - | - |
| AOH30/750 (230/750CAK,230/750CCK,230/750CAK/W33, C30/750KMB Bearing Withdrawal Sleeve) | d2:114.2 mm; Calculation factor f2B:1.03; Basic dynamic load rating C:44.9 kN; Calculation factor f0:9.5; Number of balls z:27; Calculation factor fHC:1.01; D2:136 mm; Ball diameter Dw:12.7 mm; ra max.:1.5 mm; Fatigue load limit Pu:1.5 kN; |
| FTRB1326 Thrust Bearing Ring / Thrust Needle Bearing Washer 13x26x1.5mm | Calculation factor (back-to-back, face-to-face) X2:0.67; Calculation factor (single, tandem) Y2:0.87; Fatigue load limit Pu:0.38 kN; Number of balls z:32; d:65 mm; C1:6.5 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Preload class B GB:120 N; Basic dynamic load rating C:13.5 kN; Calculation factor (single, tandem) Y0:0.38; |
| 86840 / CR86840 Stainless Speedi Sleeve For Shaft Repair | Grease Speed Rating n1:3200 rpm; B:45.00 mm; Accessories:Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:153000 N; Fillet Radius ra:2.50 mm; D:200.0000 mm; Basic Static Radial Load Rating Co:118000 N; Oil Speed Rating n2:3800 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Oil Speed Rating Open/Shielded n2:3800 rpm; |
| ZM40 Precision Locknut (M40x1.5)x58x14mm | Static Load Rating (kN):6.6; SKU:2207-2rstn-nsk; Grease Limiting Speed (r/min):8500; D:72mm; d:35mm; Dynamic Load Rating (kN):21.7; Weight:0.02 KGS; Cage Type:Plastic; Oil Limiting Speed (r/min):10000; Availability:In Stock; |
| TRC411 Thrust Bearing Ring / Thrust Needle Bearing Washer 6.35x17.45x2.4mm | l7 min.:88 mm; Mass rod end:15 kg; G:M 80; dk:105 mm; d:80 mm; α:6 °; B:55 mm; Basic static load rating C0:655 kN; Specific dynamic load factor K:100 N/mm²; C1 max.:48 mm; |
| AH2336G Withdrawal Sleeve(matched Bearing:22336CAK/W33,22336CCK/W33) | PG:1/8 NPT; R1:53.181 mm; Bearing:22216 EK; Da:140 mm; R2:21.431 mm; ba:33.337 mm; Initial grease fill:87.885 g; Cap bolt recommended tightening torque:298.3 N·m; P150°:44.5 kN; Mass pillow block:21.8 kg; |
| 99875 / CR99875 Stainless Speedi Sleeve For Shaft Repair | d:160.000 mm; Basic Static Radial Load Rating Co:60000 N; Grease Speed Rating Open/Shielded n1:2800 rpm; Accessories:Two Seals; Basic Dynamic Radial Load Rating C:49400 N; B:20.00 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; D:200.0000 mm; Sealed Speed Rating n3:0 rpm; |
| TRE4458 Thrust Bearing Ring / Thrust Needle Bearing Washer 69.85x92.075x4mm | r1,2 min.:7 mm; Cb min.:12.5 mm; Da min.:184 mm; Calculation factor e:0.33; C:53.975 mm; d:114.975 mm; Fatigue load limit Pu:88 kN; T:66.675 mm; Dimension series:HH 224300; Reference speed:2200 r/min; |
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
MSR55x2 Precision Locknut / MSR-M55x2 Locking Nut (M55x2)x75x25mm Video
Contact Us
- BEARING MFG.CORP.
- Address1500 Holmes Road, Elgin, lL 60123, U.S.A.
- Phone(Working Time)888-6528
- Fax
Withdrawal sleeves CATEGORIES
- Crossed Roller Bearing
- Spherical Roller Bearing
- Taper Roller Bearing
- Thrust Roller Bearings
- Water pump bearings
- Wind power bearings
- Wire Race Bearing
- Withdrawal sleeves
- YRT bearing
- 6005 2rs Bearing
- 6306 Bearing
- L68149 Bearing
- Ucp210 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Thrust Tapered Roller Bearings
- Thrust Cylindrical Roller Bearing
- Tapered Roller Bearing
- Angular Contact Ball Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings
HMV82E / HMV 82E Hydraulic Nut 412x534x72mm
15 mm x 32 mm x 9 mm HMV80E / HMV 80E Hydraulic Nut 402x522x71mm
HMV76E / HMV 76E Hydraulic Nut 382x498x69mm
HMV74E / HMV 74E Hydraulic Nut 372x486x68mm
HMV73E / HMV 73E Hydraulic Nut 367x482x68mm