- BEARING MFG.CORP.
- Crossed Roller Bearing Spherical Roller Bearing Taper Roller Bearing
English
Home>Products>Withdrawal sleeves>CPR81217 Thrust Plate 85x125x9.5mm
CPR81217 Thrust Plate 85x125x9.5mm
category
Withdrawal sleeves
CPR81217 Thrust Plate 85x125x9.5mm SPECIFICATIONS
QuestionCPR81217 Thrust Plate 85x125x9.5mm ? BEARING MFG.CORP. Find what you need faster by 27000 Limiting Speed Rating (r/min): entering your Steel Cage Type: Withdrawal sleeves information .
- 27000
- Steel
- Two Rubber Seals
- 6200-c-2hrs-fag
- 0.02 KGS
- In Stock
- 0.177
- 10mm
-
BEARING MFG.CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
CPR81217 Thrust Plate 85x125x9.5mm Systems
- 27000
- Steel
- Two Rubber Seals
- 6200-c-2hrs-fag
- 0.02 KGS
- In Stock
- 0.177
- 10mm
- 30mm
- ---
CPR81217 Thrust Plate 85x125x9.5mm Compare similar products
| No. | Brand | J | F | f | T | A | s | S | r |
| 7001140808 | INA | - | - | - | - | - | - | - | - |
| 1000 | NTN | - | - | - | - | - | - | - | - |
| 2 | Parker | - | - | - | - | - | - | - | - |
| 1220X2440mm | INA | - | - | - | - | - | - | - | - |
| NK20/20, | INA | - | - | - | - | - | - | - | - |
| A4VG | Rexroth | - | - | - | - | - | - | - | - |
| 56650 | Timken | - | - | - | - | - | - | - | - |
| F1 | - | - | - | - | - | - | - | - | - |
| 4.8mm | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 12/24V | - | - | - | - | - | - | - | - | - |
| 697-2RS | - | - | - | - | - | - | - | - | - |
| 25420 | - | - | - | - | - | - | - | - | - |
| 20 | - | - | - | - | - | - | - | - | - |
| 2700K | - | - | - | - | - | - | - | - | - |
| MR-2 | Nachi | - | - | - | - | - | - | - | - |
| (Qty.10) | - | - | - | - | - | - | - | - | - |
| 481416 | Parker | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| J-8360-7 | - | - | - | - | - | - | - | - | - |
| 6207 | NTN | - | - | - | - | - | - | - | - |
| 750 | fag | - | - | - | - | - | - | - | - |
| 1220*2440*18mm | - | - | - | - | - | - | - | - | - |
| 1100 | NTN | - | - | - | - | - | - | - | - |
| CP1.5120155 Thrust Plate 120x153.8x1.5mm | Mass pillow block:19 kg; L:330.2 mm; ba:40.481 mm; Pa:9.43 kN; J max.:279.4 mm; S:4.763 mm; A2:209.55 mm; Cap bolt recommended tightening torque:298.3 N·m; h:35.719 mm; H1:88.9 mm; |
| AOH3164G(23164CCK/W33, C3164KM, 23164CCK, 23164CAK Bearing Withdrawal Lseeve) | Dynamic Load Rating (kN):302.5; Weight:9.98 KGS; Availability:In Stock; Seals or Shields:Open Type; d:150mm; D:270mm; Static Load Rating (kN):305.2; Clearance:Standard; Speed Rating (r/min):5300; SKU:2mm230wicrsul-timken; |
| AH2338G Withdrawal Sleeve(matched Bearing:22338CCK, 22338CAK, 22338CCK/W33) | Seals or Shields:Two Metal Shields; Static Load Rating (kN):58.5; B:36.5mm; Availability:In Stock; Limiting Speed Rating (r/min):5600; Fatigue Load Rating (kN):2.5; Weight:0.02 KGS; Dynamic Load Rating (kN):73.5; Cage Type:Steel; Clearance:C3; |
| 99393 / CR99393 Stainless Speedi Sleeve For Shaft Repair | Preload:Medium Preload; d:30mm; D:62mm; Seals or Shields:Open Type; Limiting Axial Load (kN):46.4; SKU:30tab06u/gmp4-nachi; Availability:In Stock; Grease Limiting Speed (r/min):4650; Weight:0.21 KGS; Dynamic Load Rating (kN):29.9; |
| CR99838 Stainless Steel Speedi Sleeve For Shaft Repair | Reference speed:240 r/min; Limiting speed:450 r/min; Mass bearing:810 kg; d:800 mm; B1:222 mm; Minimum axial load factor A:290; Basic dynamic load rating C:11300 kN; B:78 mm; Fatigue load limit Pu:3900 kN; D:1180 mm; |
| 99533 / CR 99533 Stainless Speedi Sleeve For Shaft Repair | SKU:6018-m-c3-fag; B:24mm; Seals or Shields:Open Type; Availability:In Stock; D:140mm; Static Load Rating (kN):50; Clearance:C3; d:90mm; Dynamic Load Rating (kN):58.5; Reference Speed Rating (r/min):6000; |
| FTRD6590 Thrust Bearing Ring / Thrust Needle Bearing Washer 65x90x2.5mm | Basic dynamic load rating C:11000 kN; F:572.3 mm; Calculation factor kr:730; C:540 mm; Fatigue load limit Pu:2160 kN; D1 ≈:659 mm; d:485 mm; b:22.3 mm; Mass bearing:830 kg; K:12 mm; |
| TRE3648 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x76.2x4mm | d:406.445 mm; r1,2 min.:6.4 mm; Fatigue load limit Pu:1180 kN; D1 ≈:541 mm; Calculation factor Y0:2; B:409.575 mm; Basic dynamic load rating C:6050 kN; Thrust factor K:1.76; Comparative axial load rating CFa:264 kN; Mass bearing:304 kg; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
CPR81217 Thrust Plate 85x125x9.5mm Video
Contact Us
- BEARING MFG.CORP.
- Address1500 Holmes Road, Elgin, lL 60123, U.S.A.
- Phone(Working Time)888-6528
- Fax
Withdrawal sleeves CATEGORIES
- Crossed Roller Bearing
- Spherical Roller Bearing
- Taper Roller Bearing
- Thrust Roller Bearings
- Water pump bearings
- Wind power bearings
- Wire Race Bearing
- Withdrawal sleeves
- YRT bearing
- 6005 2rs Bearing
- 6306 Bearing
- L68149 Bearing
- Ucp210 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Thrust Tapered Roller Bearings
- Thrust Cylindrical Roller Bearing
- Tapered Roller Bearing
- Angular Contact Ball Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings
HMV82E / HMV 82E Hydraulic Nut 412x534x72mm
15 mm x 32 mm x 9 mm HMV80E / HMV 80E Hydraulic Nut 402x522x71mm
HMV76E / HMV 76E Hydraulic Nut 382x498x69mm
HMV74E / HMV 74E Hydraulic Nut 372x486x68mm
HMV73E / HMV 73E Hydraulic Nut 367x482x68mm