- BEARING MFG.CORP.
- Crossed Roller Bearing Spherical Roller Bearing Taper Roller Bearing
English
Home>Products>Withdrawal sleeves>150X180X15HMSA10RG Shaft Oil Seal 150x180x15mm
150X180X15HMSA10RG Shaft Oil Seal 150x180x15mm
category
Withdrawal sleeves
Timken 1971-1976 Bearing SPECIFICATIONS
What is the BEARING MFG.CORP. Open Type Seals or Shields: best place to buy 150X180X15HMSA10RG Shaft Oil Seal 150x180x15mm online? Standard Clearance: Withdrawal sleeves Manufacturing Service . 0.02 KGS Weight:
- Timken
1971-1976
- Open Type
- 0.02 KGS
- Standard
- In Stock
- 35mm
- 2202j-qbl
- Steel
- 15mm
-
BEARING MFG.CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
150X180X15HMSA10RG Shaft Oil Seal 150x180x15mm Systems
- Open Type
- 0.02 KGS
- Standard
- In Stock
- 35mm
- 2202j-qbl
- Steel
- 15mm
- 14mm
Timken 1971-1976 150X180X15HMSA10RG Shaft Oil Seal 150x180x15mm Compare similar products
| No. | Brand | J | F | f | T | A | s | S | r |
| C500S | - | - | - | - | - | - | - | - | - |
| 6410 | - | - | - | - | - | - | - | - | - |
| PC120-5 | - | - | - | - | - | - | - | - | - |
| A2F10.12.23.28.45.55W3P1 | - | - | - | - | - | - | - | - | - |
| 18mm, | - | - | - | - | - | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 1980-1990 | Timken | - | - | - | - | - | - | - | - |
| 32MCY14-1D/T | - | - | - | - | - | - | - | - | - |
| J-45548 | - | - | - | - | - | - | - | - | - |
| BM1 | - | - | - | - | - | - | - | - | - |
| 182 | INA | - | - | - | - | - | - | - | - |
| 594A | Timken | - | - | - | - | - | - | - | - |
| J1 | - | - | - | - | - | - | - | - | - |
| 7310 | - | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| 070-0020 | Danfoss | - | - | - | - | - | - | - | - |
| 10PC | - | - | - | - | - | 53.975 mm | 25.4 mm | - | - |
| N311 | NSK | - | - | - | - | - | - | - | - |
| 16-0-1 | - | - | - | - | - | - | - | - | - |
| F636ZZ | - | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| CL2B-DA01B | - | - | - | - | - | - | - | - | - |
| MF85ZZ | - | - | - | - | - | - | - | - | - |
| 6305LLU | koyo | - | - | - | - | - | - | - | - |
| 6001-ZZ | - | - | - | - | - | - | - | - | - |
| 36*1W | - | - | - | - | - | - | - | - | - |
| 9/12 | - | - | - | - | - | - | - | - | - |
| 32220 | SKF | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 87911 / CR87911 Stainless Speedi Sleeve For Shaft Repair | d1:131.762 mm; Lock nut:AN 30; Hydraulic nut:HMVC 30E; B4:28.575 mm; Threads per inch:12; Mass adapter sleeve assembly:7.25 kg; B1:107.467 mm; d:150 mm; Sleeve:S 30x5.3/16; Lock washer:W 30; |
| HMV13E / HMV 13E Hydraulic Nut (M65x2)x130x43mm | Basic Dynamic Radial Load Rating C:6240 N; B:10.00 mm; Basic Static Radial Load Rating Co:3200 N; D:32.0000 mm; d:12.000 mm; Grease Speed Rating n1:22000 rpm; Fillet Radius ra:0.64 mm; Oil Speed Rating n2:29000 rpm; Fillet Radius rb:0.30 mm; |
| MSR28x1.5 Precision Locknut / MSR-M28x1.5 Locking Nut (M28x1.5)x46x20mm | Static Load Rating (kN):8.1; Seals or Shields:Open Type; B:20mm; D:90mm; Clearance:C3; d:50mm; Dynamic Load Rating (kN):22.8; Availability:In Stock; Oil Limiting Speed (r/min):8000; Cage Type:Steel; |
| 90766 / CR90766 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Two Metal Shields; Weight:0.20 KGS; SKU:lj3/4-zz-r&m; D:1.875 inch; Clearance:Standard; Availability:In Stock; d:0.75 inch; B:0.563 inch; |
| AOH240/1000 (240/1000CAK, 240/1000CCK, 240/1000CCK/W33,240/1000CAK30F/W33 Bearing Withdrawal Sleeve) | Fatigue Load Rating (kN):--; Seals or Shields:Non-Contact Seal; Availability:In Stock; Cage Type:Steel; Reference Speed Rating (r/min):--; Limiting Speed Rating (r/min):10000; d:20mm; Static Load Rating (kN):7.9; Dynamic Load Rating (kN):15.9; B:15mm; |
| CR170x200x15HMSA10 RG Shaft Oil Seal 170x200x15mm | D:100mm; Cage Type:Brass; B:36mm; d:45mm; SKU:22309emw33w800c4-tim; Availability:In Stock; Limiting Speed Rating (r/min):5100; Dynamic Load Rating (kN):180; Static Load Rating (kN):169; Clearance:C4; |
| TRE1625 Thrust Bearing Ring / Thrust Needle Bearing Washer 25.4x39.675x4mm | B:28.00 mm; Grease Speed Rating n1:3800 rpm; Basic Static Radial Load Rating Co:83000 N; d:85.000 mm; D:150.0000 mm; Basic Dynamic Radial Load Rating C:90400 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4900 rpm; Fillet Radius rb:1.00 mm; |
| 99599 / CR 99599 Stainless Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):1080; Cage Type:Brass; SKU:23038-e1a-k-m-c3-fag; Seals or Shields:Open Type; Fatigue Load Rating (kN):180; Clearance:C3; Availability:In Stock; Limiting Speed Rating (r/min):2400; Static Load Rating (kN):1550; Weight:0.02 KGS; |
150X180X15HMSA10RG Shaft Oil Seal 150x180x15mm Video
Timken 1971-1976 INTERCHANGE
Withdrawal sleeves Part series 1971-1976 is a potential replacement for these common bearing part numbers:
1971-1976
1971-1976
1971-1976
1971-1976
1971-1976
1971-1976
1971-1976
1971-1976
Contact Us
- BEARING MFG.CORP.
- Address1500 Holmes Road, Elgin, lL 60123, U.S.A.
- Phone(Working Time)888-6528
- Fax
Withdrawal sleeves CATEGORIES
- Crossed Roller Bearing
- Spherical Roller Bearing
- Taper Roller Bearing
- Thrust Roller Bearings
- Water pump bearings
- Wind power bearings
- Wire Race Bearing
- Withdrawal sleeves
- YRT bearing
- 6005 2rs Bearing
- 6306 Bearing
- L68149 Bearing
- Ucp210 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Thrust Tapered Roller Bearings
- Thrust Cylindrical Roller Bearing
- Tapered Roller Bearing
- Angular Contact Ball Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings
HMV82E / HMV 82E Hydraulic Nut 412x534x72mm
15 mm x 32 mm x 9 mm HMV80E / HMV 80E Hydraulic Nut 402x522x71mm
HMV76E / HMV 76E Hydraulic Nut 382x498x69mm
HMV74E / HMV 74E Hydraulic Nut 372x486x68mm
HMV73E / HMV 73E Hydraulic Nut 367x482x68mm