22211.EAW33 Bearings 55x100x25mm

d2 ≈:600 mm; Misalignment factor k1:0.115; s1 max.:46.3 mm; ra max.:6 mm; r1,2 min.:7.5 mm; Limiting speed:560 r/min; Mass bearing:695 kg; B:325 mm; D1 ≈:740 mm; Basic dynamic load rating C:9800 kN;

a:186 mm; d1 ≈:590 mm; Calculation factor X:0.41; Limiting speed:900 r/min; da min.:558 mm; Fatigue load limit Pu:23.6 kN; Db max.:701 mm; B:82 mm; r3,4 min.:2 mm; Calculation factor Y2:0.87;

S:0.794 mm; J:152.4 mm; Mass bearing unit:12.2 kg; da:76.2 mm; A:69.85 mm; a:6.35 mm; L:193.675 mm; Basic dynamic load rating C:212 kN; Attachment bolt diameter G:4 x 19.05; N1:20.637 mm;

Basic static load rating C0:290 kN; Da min.:107 mm; Cb min.:11.5 mm; D:130 mm; C:37 mm; Db min.:120 mm; r3,4 min.:2.5 mm; a:31.095 mm; Basic dynamic load rating C:282 kN; Calculation factor Y:1.7;

Mass roller and cage thrust assembly:3.75 kg; Basic static load rating C0:3250 kN; Ea:162 mm; D:250 mm; d:150 mm; Shaft washer:WS 89330; Housing washer:GS 89330; Roller and cage thrust assembly:K 89330 M; Eb:244 mm; Dw:19 mm;

D:290 mm; Reference speed:2000 r/min; Mass bearing + sleeve:25 kg; r1,2 min.:3 mm; Limiting speed:2800 r/min; ra max.:2.5 mm; d2 ≈:191 mm; b:13.9 mm; G1:16 mm; Da max.:276 mm;

Eye bolt, size:2 x M 24; P55°:5000 kN; Appropriate attachment bolt, size G:36 mm; J:670 mm; J1:160 mm; Cap bolt, size:M 30x200; Locating ring:2 x FRB 10/460; N4 max.:20 mm; A2:315 mm; P0°:4000 kN;

ra max.:5 mm; D:650 mm; Basic dynamic load rating C:1110 kN; Limiting speed:1500 r/min; Mass bearing:190 kg; Calculation factor Y2:0.81; r0:3 mm; Calculation factor e:1.34; r1,2 min.:6 mm; Calculation factor Y0:0.44;

Labyrinth ring:2 x LOR 101; R2:30.163 mm; PG:1/4 NPT; Cap bolt recommended tightening torque:203.4 N·m; RG:3/8 NPT; Adapter sleeve assembly:SNW 20x3.3/8; ba:44.45 mm; H2:44.45 mm; Initial grease fill:181.44 g; J max.:333.375 mm;

D:85.0000 mm; Basic Static Radial Load Rating Co:25000 N; Basic Dynamic Radial Load Rating C:31900 N; Oil Speed Rating n2:9500 rpm; Grease Speed Rating n1:7300 rpm; B:19.00 mm; Fillet Radius ra:1.00 mm; d:45.000 mm;

d:300.000 mm; B:74.00 mm; Grease Speed Rating Open/Shielded n1:1200 rpm; Basic Static Radial Load Rating Co:500000 N; Fillet Radius ra:3.00 mm; D:460.0000 mm; Basic Dynamic Radial Load Rating C:358000 N; Accessories:One Shield & Snap-Ri; Sealed Speed Rating n3:780 rpm; Oil Speed Rating Open/Shielded

d:690 mm; Mass bearing:1000 kg; D:980 mm; r3,4 min.:7.5 mm; rb max.:6 mm; B:365 mm; Limiting speed:600 r/min; K:15 mm; D1 ≈:894 mm; b:25.3 mm;

Basic Static Radial Load Rating Co:102000 N; d:60.000 mm; Grease Speed Rating Open/Shielded n1:3800 rpm; Fillet Radius ra:2.00 mm; D:150.0000 mm; Oil Speed Rating Open/Shielded n2:4600 rpm; Accessories:Two Shields; B:35.00 mm; Basic Dynamic Radial Load Rating C:117000 N;

ba:44.45 mm; H2:41.275 mm; L:349.25 mm; Da:160 mm; Bearing:22315 EK; da:63.5 mm; H:192.088 mm; Cap bolt:2 x 5/8-11 UNC; Housing:FSAF 615; J max.:295.275 mm;

PG:1/8 NPT; P60°:54.3 kN; Initial grease fill:136.08 g; Ca:37.008 mm; Mass pillow block:12.7 kg; A2:118.666 mm; Pa:5.65 kN; P120°:20 kN; Da:130 mm; H1:82.55 mm;