- BEARING MFG.CORP.
- Crossed Roller Bearing Spherical Roller Bearing Taper Roller Bearing
English
Home>Products>Withdrawal sleeves>85469 / CR85469 Stainless Speedi Sleeve For Shaft Repair
85469 / CR85469 Stainless Speedi Sleeve For Shaft Repair MODELS
Need a CAD or 3D Model?
85469 / CR85469 Stainless Speedi Sleeve For Shaft Repair
category
Withdrawal sleeves
85469 / CR85469 Stainless Speedi Sleeve For Shaft Repair SPECIFICATIONS
What BEARING MFG.CORP. In Stock Availability: is 4000 Limiting Speed Rating (r/min): the best place to buy 85469 / CR85469 Stainless Speedi Sleeve For Shaft Repair online? Withdrawal sleeves Manufacturing Service .
- In Stock
- 4000
- 22317-e1a-k-m-c3-fag
- 50
- 60mm
- Open Type
- 180mm
- 540
-
BEARING MFG.CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
85469 / CR85469 Stainless Speedi Sleeve For Shaft Repair Systems
- In Stock
- 4000
- 22317-e1a-k-m-c3-fag
- 50
- 60mm
- Open Type
- 180mm
- 540
- Brass
- 560
85469 / CR85469 Stainless Speedi Sleeve For Shaft Repair Compare similar products
| No. | Brand | J | F | f | T | A | s | S | r |
| 31Q9-40020 | - | - | - | - | - | - | - | - | - |
| 12V | - | - | - | - | - | - | - | - | - |
| 6304-2Z/C3-2RS2/C3GFG | INA | - | - | - | - | - | - | - | - |
| SK50 | - | - | - | - | - | - | - | - | - |
| 30X55X32 | - | - | - | - | - | - | - | - | - |
| 6251-11-3200 | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 650 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| RS25 | - | - | - | - | - | - | - | - | - |
| LM301H | - | - | - | - | - | - | - | - | - |
| 3/8" | Danfoss | - | - | - | - | - | - | - | - |
| (22X28X16) | - | - | - | - | - | - | - | - | - |
| 2835 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| SL183030-C3 | INA | - | - | - | - | - | - | - | - |
| 3-9x40 | IKO | - | - | - | - | - | - | - | - |
| 12mm/16mm/17mm/18mm | - | - | - | - | - | - | - | - | - |
| #HR32207J | NSK | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| (10-5-10) | - | - | - | - | - | - | - | - | - |
| Ve9 | - | - | - | - | - | - | - | - | - |
| (Qty.10) | - | - | - | - | - | - | - | - | - |
| 53mm | - | - | - | - | - | - | - | - | - |
| 1000d | INA | - | - | - | - | - | - | - | - |
| 98%Min | - | - | - | - | - | - | - | - | - |
| AOHX241/600 (241/600CAK, 241/600CCK, 241/600ECAK30/W33 Bearing Withdrawal Sleeve) | Static Load Rating (kN):66; Availability:In Stock; d:105mm; D:160mm; B:26mm; Weight:1.58 KGS; Cage Type:Steel; Dynamic Load Rating (kN):72.5; Seals or Shields:Two Rubber Seals; Clearance:C3; |
| HMV20E / HMV 20E Hydraulic Nut (M100x2)x166x44mm | Weight:0.02 KGS; Dynamic Load Rating (kN):27.5; D:72mm; Fatigue Load Rating (kN):0.72; Availability:In Stock; Static Load Rating (kN):15.3; Limiting Speed Rating (r/min):5700; d:35mm; Clearance:Standard; SKU:6207-2rsr-fag; |
| 84576 / CR84576 Stainless Speedi Sleeve For Shaft Repair | P120°:107 kN; P90°:173 kN; Cap bolt recommended tightening torque:271.2 N·m; L:711.2 mm; H:401.637 mm; H2:79.375 mm; P180°:113 kN; Mass pillow block:178 kg; End plug (suffix Y):EPR 16; J max.:619.125 mm; |
| FTRA1326 Thrust Bearing Ring / Thrust Needle Bearing Washer 13x26x1mm | D:75mm; Fatigue Load Rating (kN):--; Reference Speed Rating (r/min):--; Dynamic Load Rating (kN):21; SKU:6009-2rs-koyo; B:16mm; Weight:0.02 KGS; Availability:In Stock; Seals or Shields:Two Rubber Seals; d:45mm; |
| AHX2319 Withdrawal Sleeve(matched Bearing:2319K, 22319EK, C2319K) | Ca:73.787 mm; R1:73.025 mm; da:82.55 mm; PG:1/8 NPT; Bearing:22318 EK; J1:57.15 mm; Cap bolt:2 x 3/4-10 UNC; Bearing limiting speed:3600 r/min; P180°:54.3 kN; End plug (suffix Y):EPR 11; |
| FTRE1629 Thrust Bearing Ring / Thrust Needle Bearing Washer 16x29x3mm | Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; B1:3 mm; B:10 mm; d:14 mm; Coefficient of friction µ min.:0.08; D1:25 mm; Permissible sliding velocity v min.:0 m/s; Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; |
| CP2917 Thrust Plate 9x16.4x2mm | H2:45 mm; H:242 mm; L:410 mm; P0°:600 kN; P55°:680 kN; A2:195 mm; P90°:410 kN; A1:120 mm; Da:200 mm; Mass housing:22 kg; |
| AH24028 Withdrawal Sleeve(matched Bearing:24028CCK30/W33, C4028K30V) | Reference speed:32000 r/min; Mass bearing:0.13 kg; Basic static load rating C0:7.8 kN; Da max.:46.4 mm; D1 ≈:43.95 mm; ra max.:1 mm; B:15 mm; Calculation factor f0:13.9; da min.:30.6 mm; Limiting speed:20000 r/min; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
85469 / CR85469 Stainless Speedi Sleeve For Shaft Repair Video
Contact Us
- BEARING MFG.CORP.
- Address1500 Holmes Road, Elgin, lL 60123, U.S.A.
- Phone(Working Time)888-6528
- Fax
Withdrawal sleeves CATEGORIES
- Crossed Roller Bearing
- Spherical Roller Bearing
- Taper Roller Bearing
- Thrust Roller Bearings
- Water pump bearings
- Wind power bearings
- Wire Race Bearing
- Withdrawal sleeves
- YRT bearing
- 6005 2rs Bearing
- 6306 Bearing
- L68149 Bearing
- Ucp210 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Thrust Tapered Roller Bearings
- Thrust Cylindrical Roller Bearing
- Tapered Roller Bearing
- Angular Contact Ball Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings
HMV82E / HMV 82E Hydraulic Nut 412x534x72mm
15 mm x 32 mm x 9 mm HMV80E / HMV 80E Hydraulic Nut 402x522x71mm
HMV76E / HMV 76E Hydraulic Nut 382x498x69mm
HMV74E / HMV 74E Hydraulic Nut 372x486x68mm
HMV73E / HMV 73E Hydraulic Nut 367x482x68mm